联系我们1
软管泵数控成型机订制批发
更新时间：2026-11-14 21:59:04 ip归属地：靖江 浏览次数:2 公司名称：焦作 豫信致诚机械设备(靖江市分公司)
| 产品参数 | |
|---|---|
| 产品价格 | 218 |
| 发货期限 | 电议 |
| 供货总量 | 电议 |
| 运费说明 | 电议 |
| 规格型号 | YXRG-15 (200) |
| 流量 | 2~85立方/小时 |
| 功率 | 1.5~35kw |
| 压力 | 1Mpa~2Mpa |
| 重量 | 60~2000kg |
| 水平输送能力 | 100m |
| 垂直输送 | 3~15m |
| 软管泵吸程 | 8m |
| 软管尺寸 | 按规格定制 |
| 设备类型 | 小型软管泵 |
| 设备用途 | 工业软管泵、输送软管泵 |
| 工作原理 | 滚轴挤压式循环往复 |
| 参考价格 | 5000~85000 |
| 耐腐蚀性输送性能 | 可输送 |
| 食品果酱输送性能 | 可升级为不锈钢型软管泵，食品级软管 |
| 其他行业应用 | 根据输送物质类型，定制设计加工 |
| 交货周期 | 小型软管泵现货，大型定制 |
| 付款方式 | 预付30%，剩余货到付清 |
| 范围 | 软管泵数控成型机供应范围覆盖江苏省、泰州市、靖江市、海陵区、高港区、兴化市、泰兴市、姜堰区等区域。 |
豫信致诚机械设备(靖江市分公司)价值观：创新、品质、诚信、合作共赢
使命：让地面更美好，让生活更幸福
理念：用更有价值的 泰州靖江就近PVC成型机、泰州靖江本地塑料成型机产品与理念让更多人真正受益
愿景：致力于打造一家受人尊敬的，更具社会影响力的 泰州靖江就近卷材成型机、靖江本地边沟修筑机、靖江本地附近工业蠕动泵企业
软管泵具有输送强研磨性介质的能力。它无阀、无密封，同介质接触的 部件是橡胶软管的内腔，压缩软管的转子完全独立于介质之外。
The hose pump has the ability to transport strong abrasive media. It has no valve, no seal, and the only part in contact with the medium is the inner cavity of the rubber hose. The rotor of the compression hose is completely independent of the medium.
软管泵是由泵壳、转子体、机座、软管、减速电机以及电控系统等部分组成。转子体旋转，转子体上的一对压辊沿着一根特制的胶管旋转，压辊与泵壳产生的挤压力将胶管压扁，在管子自身弹性和侧导辊的作用下，通过恢复原状产生的真空吸入物料，物料从管内排出，这样往复循环。
The hose pump is composed of pump casing, rotor body, frame, hose, reduction motor and electronic control system. The rotor body rotates, and a pair of pressure rollers on the rotor body rotates along a special rubber hose. The squeezing force generated by the pressure roller and the pump casing will flatten the rubber hose. The elasticity of the tube and the side guide rollers restore the The vacuum produced by the original state sucks the material, and the material is discharged from the tube, so as to reciprocate.
众所周知软管泵在运行时，是通过一根U型附有弹性的橡胶软管来完成输送。今天小编需要强调的是，软管存放时间不宜过长，一般以一年为限。在停工期间，对装有软管的泵，若长期不用，每隔一个月需转动泵一次。以免压辊长时间压在泵管的某一处，减弱管子回弹性，影响其流量的输送。
It is well known that when the hose pump is running, it is conveyed through a U-shaped rubber hose with elasticity. Today the editor needs to emphasize that the storage time of the hose should not be too long, and it is generally limited to one year. During the shutdown period, if the pump is equipped with a hose, if it is not used for a long time, the pump needs to be rotated every other month. So as not to press the roller for a long time at a certain position of the pump tube, it will weaken the resilience of the tube and affect its flow rate.